** Specialists in Heat Shrink Tubing and accessories
Phone: (978) 236-1050 - Fax: (978) 236-1075
| ** Specialists in Heat Shrink Tubing and accessories Phone: (978) 236-1050 - Fax: (978) 236-1075 |
| Ratio | UL Specs | MIL Specs | |
|---|---|---|---|
| High Temp, Solvent Resistant, Flame Retardant Flexible Fluor | 2 to 1 Ratio | MIL-DTL-23053/13, MIL-R-46846 Type III, Class 1 |
| 3M/ECC | Alpha | Raychem | Sumitomo |
|---|---|---|---|
| VitonTM | Fit-650 | VitonTM | FE3 |
| Description | Usages | Operating Temp | Shrink Temp | Packaging |
|---|---|---|---|---|
| Rubber-like, highly fluid resistant, flame retardant fluoro-elastomer heat-shrinkable tubing with high solvent resistance. | Recommended for applications where resistance to aggressive solvents and high temperatures is required. Bundling, harnessing and environmental protection within engine compartments is one such application. | -55 C to +200 C and up to 300 C for short periods | 120 C | Spool |
| Property (units) | Test Method | Requirements |
|---|---|---|
| Tensile Strength (psi) | ASTM D638 | 1200 min |
| Elongation (%) | ASTM D638 | 250 min |
| Tensile Strength @ 200% elongation ( | ASTM D412 | 2000 max |
| Cold Impact (-40 C) | ASTM D746 | No Cracking |
| Heat Shock (300C, 4 Hrs.) | MIL-DTL-23053 | No Cracking |
| Heat Resistance (250 C, 168 Hrs.) El | ASTM D638 | 200 min |
| Longitudinal change (%) | MIL-DTL-23053 | -20 max |
| Property (units) | Test Method | Requirements |
|---|---|---|
| Dielectric strength (volts/mil) | ASTM D876 | 200 min |
| Volume resistivity (ohm-cm) | ASTM D876 | 1.0 x 1011 |
| Property (units) | Test Method | Requirements |
|---|---|---|
| Copper mirror corrosion (175 C, 16 | MIL-DTL-23053 | No Corrosion |
| Water absorption (%) | ASTM D570 | 0.5 max |
| Fluid Resistance (23 C, 24 Hrs.) Te | MIL-DTL-23053 | 1200 min |
| Elongation (%) | MIL-DTL-23053 | 250 max |
| Flammability | MIL-DTL-23053 | 15 sec. max |